• Template & Flush Trim Double Bearing Router Bits - 1/2" Shank - Valkyr Tools
  • Template & Flush Trim Double Bearing Router Bits - 1/2" Shank - Valkyr Tools
  • Template & Flush Trim Double Bearing Router Bits - 1/2" Shank - Valkyr Tools
  • Template & Flush Trim Double Bearing Router Bits - 1/2" Shank - Valkyr Tools
  • Template & Flush Trim Double Bearing Router Bits - 1/2" Shank - Valkyr Tools
1 5

Template & Flush Trim Double Bearing Router Bits - 1/2" Shank

Template & Flush Trim Double Bearing Router Bits - 1/2" Shank

$90.00 AUD
$123.00 AUD $90.00 AUD
Sale Sold out
Variant
  • 100% Quality Guarantee
  • 7000+ Satisfied Customers
  • Worldwide Shipping

Time Saving and Versatility - All In One Bit

Template guided pattern work is one of the most common routing applications and these router bits perform perfectly with the template above or below your workpiece.

A Staple Bit for Template and Flush Trimming 

Saves You Time - With an upper and lower guide bearing you can choose which side to mount your pattern on for maximum efficiency.

Easily raise or lower the bit to use top, bottom or both bearings, this allows you to quickly flip your workpiece instead of changing bits when working with grain sensitive material.

Wide Application - Can be used for template work to make duplicates of curved workpieces as well as flush trimming of shelf edges, veneer or laminates. 

Durable - Heat resistant Teflon coating prevents the build up of sawdust, resin and pitch.

Versatile - Can be used on all types of timbers - Softwoods, Hardwoods, MDF, Plywood and Particle Board.

 

 

Specifications

Material - Body: Tungsten Cobalt Alloy
Material - Blades: C3 Micro-Grain Tungsten Carbide
Shank Diameter: 1/2"
Cutting Lengths: 13/16", 1" and 2-1/2"
Overall Length: 3", 3-3/16" and 4-23/32"

FAQ

Can the guide bearings be removed?

Yes, both the top and bottom guide bearing is removable. This can come in handy when working with stock thicker than the cutting length of the router bit.

For example, a 4" thick workpiece can be successfully trimmed by removing the top bearing from the 2-1/2" bit and trimming to over half way by following the template with the bottom bearing. The top bearing can then be re-attached and the workpiece flipped allowing the top guide bearing to run along the already trimmed section, completing the trimming process.

Shipping & Delivery

Expect to receive your order within 5-14 business days, depending on where you are in the world.

For remote locations it will take a little longer as our shipping partners need to travel just a bit further.

Tracking numbers are provided for all orders, we also keep track of your order progress and update you if there are any changes or delays.

Please note we are unable to deliver to PO BOX addresses for orders that require a signature to confirm delivery.

View full details

Customer Reviews

Based on 15 reviews
67%
(10)
13%
(2)
13%
(2)
0%
(0)
7%
(1)
S
Shane Kassulke

Wasn’t expecting much for the price but was surprised with the results. It effortlessly cut the 1 1/2” thick edge of the maple table top I was fabricating.

K
Kat

I used it for the first time today on 5/25 alder wood & was quite pleased with the results. It followed the templates as flawlessly as a straight cut bit could do. Oh, & it's Dewalt yellow so that's cool. I would buy again.

P
Paris Hoppe

Decent bit, needed sharpening though

D
Donnell O

Works very well for the price. I have a similar one from Lowe's from years back, and they are very comparable, but this was a fraction of the price. and I have been using it on red oak with good results, provided I use the router in the right direction!

K
Koch

If you’re a pro get a spiral flush cut. If your a hobbyist this is decent

123