• Finger Joint Router Bit - 1/2" Shank - Valkyr Tools
  • Finger Joint Router Bit - 1/2" Shank - Valkyr Tools
  • Finger Joint Router Bit - 1/2" Shank - Valkyr Tools
  • Finger Joint Router Bit - 1/2" Shank - Valkyr Tools
1 4

Finger Joint Router Bit - 1/2" Shank

Finger Joint Router Bit - 1/2" Shank

$52.00 AUD
$52.00 AUD
Sale Sold out
  • 100% Quality Guarantee
  • 7000+ Satisfied Customers
  • Worldwide Shipping

Make Your Own Professional Finger Joints

Ideal for splicing boards end-to-end or edge-to-edge.

Finger Joints are renown for creating a bond stronger than the wood itself by greatly increasing the gluing surface area and locking the pieces in.

 

Product Details

- Will cut up to  1-1/4" material. 

- Heat resistant Teflon coating prevents the build up of sawdust, resin and pitch.

- Can be used on all types of timbers - Softwoods, Hardwoods, MDF, Plywood and Particle Board. For Hardwoods we recommend doing at least two shallow passes.

- Maximum RPM: 18000 

Specifications

Material - Body: Tungsten Cobalt Alloy
Material - Blades: C3 Micro-Grain Tungsten Carbide
Shank Diameter: 1/2 inch (12.7mm)
Overall Length of Tool: 3-7/16" (87.3mm)

FAQ

What are your shipping times?

Expect your new product to arrive at your doorstep in 5 -14 days, depending where you are in the world.

Shipping & Delivery

Expect to receive your order within 5-14 business days, depending on where you are in the world.

For remote locations it will take a little longer as our shipping partners need to travel just a bit further.

Tracking numbers are provided for all orders, we also keep track of your order progress and update you if there are any changes or delays.

Please note we are unable to deliver to PO BOX addresses for orders that require a signature to confirm delivery.

View full details

Customer Reviews

Based on 5 reviews
60%
(3)
20%
(1)
20%
(1)
0%
(0)
0%
(0)
S
Sydnie Muller

No issues

T
Tod Bednar

Good bit, did what it needed

M
Millie Parisian

Late delivery but the actual bit was alright
.

J
Janiya Koelpin

Used it to finger join some scrap together, set up was a pain but it worked out in the end

M
Mark O'Hara

It took me a while to get to use this bit, mainly because I wanted to build a router table to ensure my finger joints were accurate and even. Once I did that this breezed through teak and walnut and enabled attractive, strong, and ultimately made my neophyte woodworking look much higher-end than I might otherwise have been able to accomplish. Very happy with the product.